Easi-Plank Herringbone Flooring is anti-static and resists common household stains & spillage. The planks include a balance layer with an attached 1.0mm cross-linked IXPE acoustic foam pad that delivers excellent noise reduction capabilities, minimising sound transmission and enhances walking comfort. Product must be installed with 200μm Builder’s Plastic on all substrates, do not fill expansion gaps with caulking/silicone. Please check local building authorities for interior wet area installation.
Make a bold statement with Easi-Plank SPC Herringbone Embossed Red Stone. Its rich, earthy tones and striking herringbone pattern add warmth and character. Waterproof and easy to maintain, it’s perfect for modern homes.
Planks Per Box: 14
Box Coverage Area: 1.094
Box Weight: 15.7
Profile: Micro Bevel Edges, V4
Finish: Embossed
Warranty: 25 Year Limited Lifetime Structural Warranty, 20 Year Limited Lifetime Residential Wear Warranty Residential, 5 Year Limited Lifetime Commercial Warranty
Coatings: 0.5mm Decor Vinyl Wear Layer
Installation Method: click profile for install
System: Unilin click profile
Plank Size: 625x125x8
How to DIY This Floor?
The easiest DIY floors are floating floors like this one! They click lock together and don’t need glue or nails - they're super easy to install and if you make a mistake, you can simply un-click them and redo it. Floating floors include laminate floors, hybrid floors, bamboo floors and even engineered timber (if you are after real wood).
What tools do I need to DIY this type of floor?
The most important tools are:
Drop Saw and / or Table Saw - to cut the floorboards and are available for $150 at most hardware stores, or you can borrow one.
Ruler or Set Square - to measure how much you need to cut for the end planks near the walls.
Pencil & Eraser - to draw the cutting lines when you reach the last planks of each row.
Other “nice-to-haves” include a DIY Flooring Kit (available at Floor venue), spirit levels, tape measures, safety equipment, and work gloves.
Pro installation tips
Floor Levelling - the subfloor refers to what you intend to lay the flooring directly over and is often concrete slabs, plywood, yellow tongue or even existing floorboards. Proper subfloor preparation is very important and you should:
Clean the subfloor
Check subfloor evenness (to prevent creaking and long-term joint damage)
Underlay - is typically a soft rubber or foam material that goes underneath the floor and provides noise protection. If you live in an apartment block, your strata may have acoustic underlay requirements that you must confirm before a project.
Expansion Gaps - between the floor and the walls to allow for natural expansion and shrinkage due to temperature and moisture changes. Consider:
Plank Width - wider planks have more expansion and should be given a slightly bigger expansion gap within the range below.
Environmental Moisture - if relative humidity is high, we recommend increasing the expansion gap size.
Easi-Plank Herringbone hybrid flooring offers a gorgeous and intricate design that will certainly wow anyone entering your home. Available in eight gorgeous colours, FloorVenue is certain this range will give your interior a full make over.
Easi-Plank Flooring incorporates a 1.0mm thick IXPE acoustic foam pad. This pad helps to minimize sound transmission and enhance walking comfort.
Easi-Plank Flooring might not be suitable for all wet areas. While it resists spills, it’s crucial to check with your local building authorities to confirm if it meets the regulations for installation in bathrooms and laundry rooms.
Popular Easi-Plank SPC Herringbone Embossed Products
