About Nature's Edge 12mm
Nature’s Edge Laminate Flooring is designed for Australian homes that want the beauty of timber with the strength and convenience of laminate. Each plank is built with a 12mm core, a realistic Ultra-3D EIR wood finish, and an AC4+ wear rating – giving you a floor that looks stunning and lasts for years.
The pressed bevel design keeps dust and dirt out of the joins, so cleaning is quick and easy with a mop, vacuum, or broom. Plus, the waterproof surface makes it worry-free for everyday living.
From the warmth of Blackbutt and Honey to the bold richness of Jarrah and Espresso, Nature’s Edge offers a stylish solution for every home, all backed by a 25-year structural warranty.
Rich and bold, Nature’s Edge Jarrah laminate flooring mirrors the iconic Australian hardwood with deep red-brown hues and dramatic grain patterns. Enhanced with Ultra-3D EIR finishing, every plank feels authentic to touch and sight. The pressed bevel edge prevents dust build-up, ensuring cleaning remains effortless. Crafted in a 12mm thickness with an AC4+ rating, Jarrah delivers outstanding durability suited to high-traffic homes. Its waterproof surface means everyday cleaning is quick and stress-free using a mop, vacuum, or broom. Backed by a 25-year structural warranty, Jarrah brings timeless warmth and strength to interiors, delivering a premium look without the upkeep of real timber.
How to DIY This Floor?
The easiest DIY floors are floating floors like this one! They click lock together and don’t need glue or nails - they're super easy to install and if you make a mistake, you can simply un-click them and redo it. Floating floors include laminate floors, hybrid floors, bamboo floors and even engineered timber (if you are after real wood).
What tools do I need to DIY this type of floor?
The most important tools are:
- Drop Saw and / or Table Saw - to cut the floorboards and are available for $150 at most hardware stores, or you can borrow one.
- Ruler or Set Square - to measure how much you need to cut for the end planks near the walls.
- Pencil & Eraser - to draw the cutting lines when you reach the last planks of each row.
Other “nice-to-haves” include a DIY Flooring Kit (available at Floor venue), spirit levels, tape measures, safety equipment, and work gloves.
Pro installation tips
- Floor Levelling - the subfloor refers to what you intend to lay the flooring directly over and is often concrete slabs, plywood, yellow tongue or even existing floorboards. Proper subfloor preparation is very important and you should:
- Clean the subfloor
- Check subfloor evenness (to prevent creaking and long-term joint damage)
- Underlay - is typically a soft rubber or foam material that goes underneath the floor and provides noise protection. If you live in an apartment block, your strata may have acoustic underlay requirements that you must confirm before a project.
- Expansion Gaps - between the floor and the walls to allow for natural expansion and shrinkage due to temperature and moisture changes. Consider:
- Plank Width - wider planks have more expansion and should be given a slightly bigger expansion gap within the range below.
- Environmental Moisture - if relative humidity is high, we recommend increasing the expansion gap size.
Inner West & East/South (Belfield): 9750 5095
Samples
