Engineered oak flooring consists of a veneer of real oak timber attached to a plywood or composite core board. The gorgeous timber is sourced from the finest plantations in Europe, France and America where only the high
Engineered oak flooring consists of a veneer of real oak timber attached to a plywood or composite core board. The gorgeous timber is sourced from the finest plantations in Europe, France and America where only the highest grade timber with minimal defects and blemishes are hand-picked.
About Walnut Clever Oak Authentic Collection (CLICK)
Engineered oak flooring consists of a veneer of real oak timber attached to a plywood or composite core board. The gorgeous timber is sourced from the finest plantations in Europe, France and America where only the highest grade timber with minimal defects and blemishes are hand-picked.
About Clever Oak Authentic Collection (CLICK)
The Clever Oak Authentic range offers a beautiful genuine oak timber veneer. The lightly wirebrushed surface brings out the natural beauty of European oak wood for the classiest interior designs. This range comes with 11 layers of UV cured polyurethane coating for greater durability against wear and tear so they can easily stand up to daily demands of residential living. The drop-end lock installation system translated to an easy and seamless installation that is even DIY friendly!
Planks Per Box: 6
Box Coverage Area: 2.1550
Finish: Lightly Brushed / 8 - 10% Matt
Warranty: 30 Year Residential Warranty | 5 years Commercial Warranty
Coatings: 11 Layers of UV Coating
Installation Method: Floating
System: Drop End Lock
Plank Size: 1900 x 189 x 14/3
Category: Oak Timber Flooring
How to DIY This Floor?
The easiest DIY floors are floating floors like this one! They click lock together and don’t need glue or nails - they're super easy to install and if you make a mistake, you can simply un-click them and redo it. Floating floors include laminate floors, hybrid floors, bamboo floors and even engineered timber (if you are after real wood).
What tools do I need to DIY this type of floor?
The most important tools are:
Drop Saw and / or Table Saw - to cut the floorboards and are available for $150 at most hardware stores, or you can borrow one.
Ruler or Set Square - to measure how much you need to cut for the end planks near the walls.
Pencil & Eraser - to draw the cutting lines when you reach the last planks of each row.
Other “nice-to-haves” include a DIY Flooring Kit (available at Floor venue), spirit levels, tape measures, safety equipment, and work gloves.
Pro installation tips
Floor Levelling - the subfloor refers to what you intend to lay the flooring directly over and is often concrete slabs, plywood, yellow tongue or even existing floorboards. Proper subfloor preparation is very important and you should:
Clean the subfloor
Check subfloor evenness (to prevent creaking and long-term joint damage)
Underlay - is typically a soft rubber or foam material that goes underneath the floor and provides noise protection. If you live in an apartment block, your strata may have acoustic underlay requirements that you must confirm before a project.
Expansion Gaps - between the floor and the walls to allow for natural expansion and shrinkage due to temperature and moisture changes. Consider:
Plank Width - wider planks have more expansion and should be given a slightly bigger expansion gap within the range below.
Environmental Moisture - if relative humidity is high, we recommend increasing the expansion gap size.
Clever Oak Authentic Collection (CLICK) Oak Timber Flooring Flooring FAQs
The Clever Oak Authentic engineered timber collection is designed for the most simplistic installations with a click lock system along the length profile and drop locks on the ends. With 11 layers of UV cured protective lacquer, the Authentic Oak timber range is designed to withstand the rough and tumble of life. Furthermore, this range can be sanded down and refinished for a refreshened look when the surface begins looking tired.
The Clever Oak Authentic range has a gorgeous oak wood finish which should be protected. The benefits of this stunning engineered timber include low maintenance, easy to clean and scratch resistance. We recommend slightly damp mopping or sweeping. It is wise to wipe down the surface with a soft cloth to remove any dirt or spills. Do not use harsh cleaning products or abrasive tools which may damage the surface over time.
Engineered oak timber flooring consists of a real veneer of oak wood attached to a plywood base, which provides superior dimensional stability against moisture and temperature fluctuations. These are also more affordable and much easier to install compared to solid timber alternatives. The authentic oak timber is usually sourced from Europe, America and France.
Popular Clever Oak Authentic Collection (CLICK) Products
