Engineered oak flooring consists of a veneer of real oak timber attached to a plywood or composite core board. The gorgeous timber is sourced from the finest plantations in Europe, France and America where only the high
Engineered oak flooring consists of a veneer of real oak timber attached to a plywood or composite core board. The gorgeous timber is sourced from the finest plantations in Europe, France and America where only the highest grade timber with minimal defects and blemishes are hand-picked.
About Bristol Clever Oak Elegance Collection (T&G)
Engineered oak flooring consists of a veneer of real oak timber attached to a plywood or composite core board. The gorgeous timber is sourced from the finest plantations in Europe, France and America where only the highest grade timber with minimal defects and blemishes are hand-picked.
About Clever Oak Elegance Collection (T&G)
The Clever Oak Elegance offers a gorgeous engineered oak timber with 2 millimetres of authentic timber surface. The multilayered plywood base comes in alternating directions for superior dimensional stability against moisture ingress or temperature fluctations. This range truly brings out the natural beauty of European oak into your home. Last but not least, they come with a tongue and groove system for easy installations.
Planks Per Box: 7
Box Coverage Area: 2.5270
Profile: Micro Bevel
Finish: Lightly Brushed / 8 - 10% Matt
Warranty: 30 Year Residential Warranty | 5 years Commercial Warranty
Coatings: 11 Layers of UV Coating
Installation Method: Floating
System: Tongue & Groove
Plank Size: 1900 x 190 x 12/2
Category: Oak Timber Flooring
How to DIY This Floor?
The easiest DIY floors are floating floors like this one! They click lock together and don’t need glue or nails - they're super easy to install and if you make a mistake, you can simply un-click them and redo it. Floating floors include laminate floors, hybrid floors, bamboo floors and even engineered timber (if you are after real wood).
What tools do I need to DIY this type of floor?
The most important tools are:
Drop Saw and / or Table Saw - to cut the floorboards and are available for $150 at most hardware stores, or you can borrow one.
Ruler or Set Square - to measure how much you need to cut for the end planks near the walls.
Pencil & Eraser - to draw the cutting lines when you reach the last planks of each row.
Other “nice-to-haves” include a DIY Flooring Kit (available at Floor venue), spirit levels, tape measures, safety equipment, and work gloves.
Pro installation tips
Floor Levelling - the subfloor refers to what you intend to lay the flooring directly over and is often concrete slabs, plywood, yellow tongue or even existing floorboards. Proper subfloor preparation is very important and you should:
Clean the subfloor
Check subfloor evenness (to prevent creaking and long-term joint damage)
Underlay - is typically a soft rubber or foam material that goes underneath the floor and provides noise protection. If you live in an apartment block, your strata may have acoustic underlay requirements that you must confirm before a project.
Expansion Gaps - between the floor and the walls to allow for natural expansion and shrinkage due to temperature and moisture changes. Consider:
Plank Width - wider planks have more expansion and should be given a slightly bigger expansion gap within the range below.
Environmental Moisture - if relative humidity is high, we recommend increasing the expansion gap size.
Clever Oak Elegance Collection (T&G) Oak Timber Flooring Flooring FAQs
The Clever Oak Elegance engineered timber collection offers a gorgeous veneer of oak wood fused to a multi-layered cross plywood. This results in superior dimensional stability against moisture ingress swelling compared to normal engineered or solid timber plank. Furthermore, the lightly wirebrushed surface comes in an 8 – 10% semigloss for a beautiful shine.
The Clever Oak Elegance range offers a gorgeous oak wood surface which would be a shame to damage. Best practices for cleaning and maintaining include mopping, vacuuming and sweeping. Keep in mind that natural oak wood should not be exposed to excess moisture for extended periods of time, so it wise to rinse the mop before cleaning. Furthermore, avoid any abrasive tools which may scratch the surface. Overall, engineered timber is just as easy to clean and maintain as any other flooring.
Engineered oak timber flooring consists of a real veneer of oak wood attached to a plywood base, which provides superior dimensional stability against moisture and temperature fluctuations. These are also more affordable and much easier to install compared to solid timber alternatives. The authentic oak timber is usually sourced from Europe, America and France.
Popular Clever Oak Elegance Collection (T&G) Products
