Engineered oak flooring consists of a veneer of real oak timber attached to a plywood or composite core board. The gorgeous timber is sourced from the finest plantations in Europe, France and America where only the high
Engineered oak flooring consists of a veneer of real oak timber attached to a plywood or composite core board. The gorgeous timber is sourced from the finest plantations in Europe, France and America where only the highest grade timber with minimal defects and blemishes are hand-picked.
About Mink Grey De Marque Chevron Parquetry 21/6mm
Engineered oak flooring consists of a veneer of real oak timber attached to a plywood or composite core board. The gorgeous timber is sourced from the finest plantations in Europe, France and America where only the highest grade timber with minimal defects and blemishes are hand-picked.
About De Marque Chevron Parquetry 21/6mm
The spectacular new Chevron flooring now available is a magnificent selection of pre-finished colours designed to create a wonderful warmth, charm and character. The contemporary palette offers a unique renaissance appeal with incredible depth and texture. Our Real Oak planks combine a 6 mm solid oak material on top of an engineered oak wear layer. The De Marque pattern is a difficult installation, however our professional carpenters have the skills and knowledge to do the beautiful herringbone parquetry the justice they deserve.
Warranty: 25 year limited (Lifetime) Structural Warranty, 20 Years Limited Residential Coating Warranty, 5 Years Limited Commercial Structural & Wear Warranty
Coatings: Free Water Based Matte Coating
Installation Method: Glue Down
Plank Size: 600x90x21/6
How to DIY This Floor?
The easiest DIY floors are floating floors like this one! They click lock together and don’t need glue or nails - they're super easy to install and if you make a mistake, you can simply un-click them and redo it. Floating floors include laminate floors, hybrid floors, bamboo floors and even engineered timber (if you are after real wood).
What tools do I need to DIY this type of floor?
The most important tools are:
Drop Saw and / or Table Saw - to cut the floorboards and are available for $150 at most hardware stores, or you can borrow one.
Ruler or Set Square - to measure how much you need to cut for the end planks near the walls.
Pencil & Eraser - to draw the cutting lines when you reach the last planks of each row.
Other “nice-to-haves” include a DIY Flooring Kit (available at Floor venue), spirit levels, tape measures, safety equipment, and work gloves.
Pro installation tips
Floor Levelling - the subfloor refers to what you intend to lay the flooring directly over and is often concrete slabs, plywood, yellow tongue or even existing floorboards. Proper subfloor preparation is very important and you should:
Clean the subfloor
Check subfloor evenness (to prevent creaking and long-term joint damage)
Underlay - is typically a soft rubber or foam material that goes underneath the floor and provides noise protection. If you live in an apartment block, your strata may have acoustic underlay requirements that you must confirm before a project.
Expansion Gaps - between the floor and the walls to allow for natural expansion and shrinkage due to temperature and moisture changes. Consider:
Plank Width - wider planks have more expansion and should be given a slightly bigger expansion gap within the range below.
Environmental Moisture - if relative humidity is high, we recommend increasing the expansion gap size.
De Marque Chevron Parquetry 21/6mm Oak Timber Flooring FAQs
The De Marque Chevron Parquetry flooring has an engineered construction which provides dimensional accuracy and stability. It also features a wear layer designed to last for centuries, maintaining an authentic timber look and feel. Similar to the famous Herringbone pattern, it was inspired by military culture from the 14th century British, implying a prestigous rank, much like this floor which has an extraordinarily durable construction.
Engineered floors are not water resistant, so you must be careful. The first step is to ensure that you have the proper entrance mats. They will help prevent dirt and grime from entering your home or business. When cleaning your engineered floor, make sure you use professional equipment and cleaning solutions from a specialized reseller. Avoid excess water on the floor when mopping by wringing out the mop beforehand.
De Marque Engineered oak flooring is made up of a variety of real timber sources. The surface veneer of timber is fused to a plywood core to provide the authentic timber look at a lower price with even greater structural durability.
Popular De Marque Chevron Parquetry 21/6mm Products
