Foam 3mm Gold with Moisture Barrier Flooring Underlay, EverQuiet Foam
Colour: Foam 3mm Gold with Moisture Barrier
Overview
Specifications
Flooring Underlay, EverQuiet FoamFAQs
DIY Advice
About
EverQuiet Foam allows you to achieve a luxurious hard flooring experience without paying an unreasonable price. Made from expanded and cross linked polyethylene, the durable foam underlay both reduces noise transmission and enhances comfort underfoot. EverQuiet Foam underlay comes with a pre-attached moisture-barrier for extra protection from environmental moisture.
How to DIY This Floor?
The easiest DIY floors are floating floors like this one! They click lock together and don’t need glue or nails - they're super easy to install and if you make a mistake, you can simply un-click them and redo it. Floating floors include laminate floors, hybrid floors, bamboo floors and even engineered timber (if you are after real wood).
What tools do I need to DIY this type of floor?
The most important tools are:
Drop Saw and / or Table Saw - to cut the floorboards and are available for $150 at most hardware stores, or you can borrow one.
Ruler or Set Square - to measure how much you need to cut for the end planks near the walls.
Pencil & Eraser - to draw the cutting lines when you reach the last planks of each row.
Other “nice-to-haves” include a DIY Flooring Kit (available at Floor venue), spirit levels, tape measures, safety equipment, and work gloves.
Pro installation tips
Floor Levelling - the subfloor refers to what you intend to lay the flooring directly over and is often concrete slabs, plywood, yellow tongue or even existing floorboards. Proper subfloor preparation is very important and you should:
Clean the subfloor
Check subfloor evenness (to prevent creaking and long-term joint damage)
Underlay - is typically a soft rubber or foam material that goes underneath the floor and provides noise protection. If you live in an apartment block, your strata may have acoustic underlay requirements that you must confirm before a project.
Expansion Gaps - between the floor and the walls to allow for natural expansion and shrinkage due to temperature and moisture changes. Consider:
Plank Width - wider planks have more expansion and should be given a slightly bigger expansion gap within the range below.
Environmental Moisture - if relative humidity is high, we recommend increasing the expansion gap size.
EverQuiet Foam Underlay Flooring FAQs
Foam underlay, also known as foam padding or foam underlayment, is a type of cushioning material used in flooring installations. It serves several purposes and is commonly used underneath laminate, engineered hardwood and other floating floor systems. They absorb impact, reduce noise transmission and also act as a moisture barrier to protect your floors. This makes them extremely useful for apartments and other multi-residential living as well.
Yes, foam underlay is effective in reducing noise transmission in flooring installations. Foam underlay acts as a sound-dampening layer between the subfloor and the finished flooring material, helping to minimize both impact noise and airborne noise. Our acoustic foam underlays are specifically designed for apartments as they are tested to minimise noise reduction to meet strata requirements.
The cost of foam underlay varies depending on several factors, including the type of foam, thickness, quality and brand. Additionally, the size of the underlay roll or pack will also affect the price. Typically, non-acoustic foam underlay should cost around $3 – $5 per square metre, whereas acoustic noise reducing foam underlay can cost from $5 – $10 per square metre.
